Product Information

How do I adjust the strap?

Please follow the instructions on the diagram below.

 

 

How to set the time, date and day?

Please follow the instructions below to assist with the changing the time, date and day.

 

Normal Crown Position

1st position     Quick operation- Date (counterclockwise)

2nd position    Time/Day setting (clockwise)

Setting the Day and Time (Hour, Minute and Second)

The hour, minute, second and day are set by the same operation

Setting The Day

  1. Pull the crown out to the 2nd position to stop the second at 0 (12 o'clock).
  2. Turn the hour/minute hands in a clockwise direction to set a day.
  3. In order set the day, you must advance the hour hand by 24 hours per day.

Note:

  • If the day is set by turning the crown counterclockwise, there is the possibility the date will not change over.
  • Do not set the day by turning the crown in counterclockwise direction.
  • The day changes somewhere between 0:00am and 5:30am or a little later.

Setting The Time

  1. After setting the day, set the hour and minute hands.
  2. Turn the hour/minute hands in a clockwise direction to set the time.
  3. To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired time and then turn back (in a counterclockwise) to the desire time.
  4. After setting the time, use a time signal to synchronise the watch by pushing the crown to normal position to start the second hand going.

Note:

  • Make sure you have correctly set AM/PM before setting the time.

Setting The Date

  1. Pull the crown out to 1st position. Turn the crown counterclockwise to set the date quickly. 

Note:

  • Do not set the date between the hours 9:00pm and 0:30am. The date may not change correctly the next day.

 

Are the watches waterproof?

Our watches are 5ATM water resistant, this mean it can take splashes of water. Please ensure you are not showering, swimming or diving with the watches on.